Experts Exchange > Questions > Install P5. I am using a PC and serial connection. We used this process to migrate an AIX 4.3.2 original system running on an IBM. Serial Console Settings for IBM pSeries. One such piece of information I needed the other day was the connection information for a serial console connection to an. We have some old IBM P5 series servers that. Accessing the Advanced System Management Interface . Login to the HMC using serial connection. Ibm System P5IBM System Storage TS2. Tape Drive Model S5. LTO Ultrium ( 1. 5 TB / 3 ) 5 SAS- 2 external encryption Express (3. S5. 3)Product Information. The TS2350 Model S53 Tape Drive uses a 6 Gbps dual port Serial. System p5, IBM Power System Model p6, and IBM Power System Model p7, and to IBM System x and PC. International Business MacHines Corporation, 33 F.3d. I am trying to install ubuntu-14.04-server-powerpc on my IBM power5 eserver (p5 type 9117-570). I can only connect to this server using a serial connection. The IBM System Storage TS2. Tape Drive Express Model S5. IBM tape reliability and performance at open systems prices. The IBM System Storage TS2. Tape Drive Express Model S5. SEO 3. 58. 0S5. X) external stand- alone or rack mountable unit, is designed to offer high capacity and performance for the midrange systems environment. The TS2. 35. 0 incorporates the Linear Tape- Open (LTO) IBM System Storage Ultrium 5 Full- High Tape Drive, which is designed to provide maximum tape drive throughput native data rate performance of up to 1. MB/sec compared to the IBM TS2. LTO Full- High Tape Drive (Ultrium 4) at up to 1. MB/sec native data transfer rate. The TS2. 35. 0 Model S5. Tape Drive uses a 6 Gbps dual port Serial Attached SCSI (SAS) interface for connection to a wide spectrum of system servers. The TS2. 35. 0 attaches to the IBM System p. IBM Power System Model p. IBM Power System Model p. IBM System x and PC servers. IBM e. Server p. 5 5. Hi. Do you have this 5. HMC station? If not and trying with hyperterminal please remember setting the following parameters. Setting up Hyper. Terminal with client. Start up a Hyper. Terminal from your PC by doing the following. Name the session test then click Ok. Under Connect using, select COM 1. Enter the following Port Settings. Bits per second 9. Data bits 8 Parity None Stop Bits 1 Flow control Hardware Click Ok when done. Note: If your client system has tty. S1 port, you should see a login prompt in the hyperterminal screen.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
August 2017
Categories |